puppies tool

Konrad:) · 26-02-2010, 03:25

Here you are:
http://www.wolfdog.org/php/modules/WolfdogDB/dbase.php

this "tool" enables to match a male to a female, to see pedigrees and to calculate Wright's Coefficient of inbreeding.

elf · 26-02-2010, 09:26

Hello Sasha,

You can also use this (which gives also AVK etc): http://www.amicale-chien-loup-tcheco...#Mating%20tool

One interesting point is the ability to get a more accurate value of the wright coefficient, for exemple in the exemple gave Paula it gives 8.5937500000%, with the complete formula it gives 11.0303640366% ( http://www.amicale-chien-loup-tcheco...2B2066&depth=5 )

With "Ancestors statistics" you can have some stats on HD and occurence in bonitation code (same exemple): http://www.amicale-chien-loup-tcheco...2B2066&depth=5

Cheers

saschia · 26-02-2010, 11:16

Thanks for all the fast answers!

Elf, that is great that you can use your tool that way, I should read the manuals it seems...

Vaiva · 22-09-2010, 09:31

Am I the only one who can not make it work for some time allready? It still shows the combined pedigree, but not common ancestors

buidelwolf · 22-09-2010, 22:30

Hello Vaiva,

For several months I also can no longer use the tool, at least from this Site, which I regret too. I suppose it also has to do with the crash of a hard disk. I assume that this will undoubtedly soon be repaired too.

The tool Elf made available is about simmilar and perhaps even more complete. The only downside of it is that its measurement is is only on a limited number of generations (5). Regarding the COI: the more generations to be measured, the more objectively the outcome as we all know.

Greetings Robbert

mijke · 23-09-2010, 00:18

No Vaiva, even for moderators it works the same at this moment!

But I expect everything will work fine in time

!

yukidomari · 09-10-2010, 10:16

Since now the WD tool doesn't work, and the tool Elf linked is only 5 generation, is there any other way to calculate COI for 10 generations, besides by hand?

Vaiva · 13-10-2010, 07:57

Quote:

Originally Posted by saschia

Thanks for all the fast answers!

Elf, that is great that you can use your tool that way, I should read the manuals it seems...

I didn't understand a thing also

Miss the good old puppies tool... It was so sweet and friendly

26-02-2010, 03:25	#1
Konrad:) Member Join Date: Feb 2006 Location: Warszawa Posts: 747	Here you are: http://www.wolfdog.org/php/modules/WolfdogDB/dbase.php this "tool" enables to match a male to a female, to see pedigrees and to calculate Wright's Coefficient of inbreeding. __________________ Eury z Peronówki http://eury.zperonowki.com/

26-02-2010, 09:26	#2
elf Member Join Date: Oct 2006 Posts: 766	Hello Sasha, You can also use this (which gives also AVK etc): http://www.amicale-chien-loup-tcheco...#Mating%20tool One interesting point is the ability to get a more accurate value of the wright coefficient, for exemple in the exemple gave Paula it gives 8.5937500000%, with the complete formula it gives 11.0303640366% ( http://www.amicale-chien-loup-tcheco...2B2066&depth=5 ) With "Ancestors statistics" you can have some stats on HD and occurence in bonitation code (same exemple): http://www.amicale-chien-loup-tcheco...2B2066&depth=5 Cheers __________________ http://www.amicale-chien-loup-tcheco...m/csvstat.html Last edited by elf; 26-02-2010 at 09:37.

26-02-2010, 11:16	#3
saschia Member Join Date: Sep 2003 Location: Bratislava Posts: 936	Thanks for all the fast answers! Elf, that is great that you can use your tool that way, I should read the manuals it seems... __________________ Saschia (Sasa Zahradnikova) http://www.chiens-loup-tchecoslovaqu...ei-et-damon.ws

22-09-2010, 09:31	#4
Vaiva ir Brukne Join Date: May 2006 Location: Vilnius Posts: 1,768	Am I the only one who can not make it work for some time allready? It still shows the combined pedigree, but not common ancestors __________________ Walkiria Girios dvasia

22-09-2010, 22:30	#5
buidelwolf senior member Join Date: Oct 2007 Location: The Netherlands Posts: 163	Hello Vaiva, For several months I also can no longer use the tool, at least from this Site, which I regret too. I suppose it also has to do with the crash of a hard disk. I assume that this will undoubtedly soon be repaired too. The tool Elf made available is about simmilar and perhaps even more complete. The only downside of it is that its measurement is is only on a limited number of generations (5). Regarding the COI: the more generations to be measured, the more objectively the outcome as we all know. Greetings Robbert Last edited by buidelwolf; 22-09-2010 at 22:33.

23-09-2010, 00:18	#6
mijke Senior Member Join Date: Sep 2003 Location: Warnsveld Posts: 2,033	No Vaiva, even for moderators it works the same at this moment! But I expect everything will work fine in time ! __________________ Vriendelijke groeten, Mijke PS: I am not a moderator anymore!!

09-10-2010, 10:16	#7
yukidomari Moderator Join Date: Mar 2010 Location: Los Angeles CA Posts: 847	Since now the WD tool doesn't work, and the tool Elf linked is only 5 generation, is there any other way to calculate COI for 10 generations, besides by hand?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode